Receive our product catalogue free of charge!
Please click the button to order our free product catalogue.
Hello! How can we help you?
How do I assemble the Syncro Steering Strap?
Elastic Strap for Walker Syncro Steering. Fits the rollators Walker 9er, 12er and, 14er.
Required tools: None
Instructions:
Removing a damaged strap:
The Elastic syncro strap starts at point A, then passes through points B, C and D to point E.
- Start on the Inner side side of thebaskey at point A by unscrewing the knurled nut with your fingers.
- Unhook the basket- and the strap eyelets.
- Unthread the end of the strap through the ring at point B, the pulley gate at point C, and the ring at point D.
- Finish at point E on the inner side of the basket by unscrewing the knurled nut with your fingers, then removing the basket- and the elastic strap eyelets.
Installing a new strap:
On the inner side of the Walker, the knurled nuts are located at points A and E.- Point A: Attach the eyelet of the new strap and then the eyelet of the basket.
- Point A: Attach and tighten the knurled nut.
- Point B: Thread the end of the new strap through the ring.
- Point C: Thread the end of the new strap through the pulley gate.
- Point D: Thread the end of the new strap through the ring.
- Point E: Attach the eyelet of the new strap and then the eyelet of the basket.
- Point E: Attach and tighten the knurled nut.
- Fold and then unfold the Walker frame again to evenly spread the tension of the strap between points A and E.
Ready for use.
The photo shows how the strap is threaded through the pulley gate at point C.
Glad we could help. Thanks for your feedback!
Please give us feedback or ask us over:
- 1300 50 30 30
- Chat with us
Or share your feedback directly:
Read and discover more about our premium quality rollators
Want to deepen your knowledge further? Below you will find everything you need to learn all about our Veloped and Walker rollators