Single-Hand Brake RIGHT

One-hand braking system for the Veloped/Walker. Both brakes (R+L) are operated with the right hand using a single brake lever. For right-hand mounting.

SKU: 11-90-015
Stock Status: In Stock
Region: Available
(Item does not ship from the EU to Australia, Canada, or the USA.)
Delivery Status: 3-5 working days
A$ 120
Excluding Tax
pcs

Get your personalised quote
Tell us what you need, and we’ll send you a personalized quote.
Request a Quote
Receive Your Quote
No obligation • We typically reply within 24 hours
Fast response
No credit card required
Free quote
The One Hand Brake for the right hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For right side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Bobby Huskey
Didn’t last long
This is broken already after only a couple of months of use
John Cluny
Single-Hand Brake
Brake works very well but it was not easy to fit, and the cross-cable tends to interfere with the forward sliding of the seat.
Dennis Roberts
Brake lever adapter / converter
Contact was easy, courteous and helpful.
Delivery was quick and straightforward and the part fitted as expected.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • Reliable pack donkey…

    The Veloped works great as a carrying aid when shopping and you have heavy groceries to bring home. In the store you don't need a shopping trolley; you just grab a basket and place it on the seat for the groceries, pay in the register and it carries …

  • ER…

    Fast delivery. Excellent workmanship and very solid. It's fun to walk around with the Walker!…

  • Very good…

    Very good, in-depth and quick consultation in chat, always very friendly, quick delivery, easy to understand and punctual, all additional parts were mounted on the Veloped, only the tyres had to be attached. The Veloped is just great; my daughter onc…

  • Like winning the lottery!…

    Due to my illness, COPD, knee joint operations and balance problems caused by spinal surgery, I could only walk in a limited way in our large garden, which has no paved paths. I absolutely could not cope with a normal walker. Therefore, this model wa…

  • Pure relief!…

    I am the kind of person who likes to read reviews, but rarely gives any. But this time I want to share my enthusiasm with others. Due to my MS illness, I am pretty much dependent on a walking aid. So far, I have been using my walking sticks. Since we…

  • The assembly was easy and quick…

    The first ride with the Veloped was fantastic. We were able to walk with my mother again on paths in the forest, which was where we had last walked together years ago. This was simply not possible with the standard walker. There were also no problems…

  • I have had my Trionic Veloped for two years now and I am very satisfied …

    It is easy to manoeuvre, stable, holds a lot and it looks cool. I have tried other walkers with puncture-free tires, but I get muscle pain in my arms from them. I do not get that with the air tires of the Veloped. The rollator works great in the wood…

  • If you can afford it!…

    Ten times the price of a bog-standard walker but, provided of course that you can afford it, well worth it! My 84 year-old wife found the small wheels of her old walker made for a very bumpy experience, which added to the problems she had with her ha…

  • Trionic Veloped Trek…

    I rate the rollator 5 of 5 stars. I am very satisfied and can only recommend it, which I have already done.

    Sincerely yours

    Paul Ihmels…

Subscribe to our newsletter!

"> ?>